Covering Cambridge and the surrounding villages

Gate Installation in Cambridge

We supply and install timber and metal gates for driveways and garden entrances across Cambridge, from simple pedestrian gates to wider driveway gates with posts and ironmongery. A gate is only as good as its hanging, so we take the time to get it level and swinging correctly. We can install alongside new fencing or as a standalone job.

5 from 6 Google reviews Est. 2014 Free, no-pressure quotes Waste taken away

A gate that drops, sticks, or won't latch properly is a daily irritation, and a gate that's hung poorly from the start will only get worse. Whether you need a new pedestrian gate to match an existing fence or a pair of driveway gates to secure a wider entrance, the quality of the installation matters as much as the gate itself.

We install timber gates - including ledged and braced, framed, and close-boarded styles - as well as metal and steel gates for driveways. The work involves setting support posts correctly in concrete at the right centres for the gate width, allowing adequate curing time before hanging, and fitting appropriate ironmongery - hinges, latches, drop bolts, and bolts - that matches the gate's weight and expected use. A heavy driveway gate needs substantial posts and heavy-duty hinges; getting those details wrong is why so many gates end up sagging within a few years.

In Cambridge we see a wide range of gate setups - Victorian terraces in Romsey with narrow side-access gates, detached properties in Newnham with long gravel driveways, and new-build estates needing simple garden entrances. We'll advise on the right gate style and post specification for your specific opening before we price the job.

We provide a fixed quote after measuring the opening and discussing your requirements. Most gate installations are completed within a day. If you're having new fencing installed at the same time, we'll plan the gate opening into the fence run from the outset. Single pedestrian gate installation in Cambridge, including posts and ironmongery, typically costs between £200 and £450 depending on gate size, material, and post work required.

What you get

  • A fixed written price, itemised - materials, labour, waste, access.
  • An arrival window we keep, and a call if anything changes.
  • The job done to the quoted spec, by the crew that came to measure.
  • Everything checked and shown to you before we leave.
  • Site swept, offcuts and old materials removed.

Questions

Gate Installation - common questions

How much does a new fence cost in Cambridge?
Closeboard fencing in Cambridge typically costs between £80 and £130 per metre supplied and installed, depending on the height you need and the ground conditions on your plot. Lap panel fencing is usually at the lower end of that range. We provide a fixed written quote after measuring up, so there are no surprises on the final bill.
What am I likely to pay to repair a fence?
Replacing a single rotten or broken fence post in Cambridge typically costs between £90 and £160, depending on the post size and how accessible it is. Replacing a snapped arris rail is generally less. We assess the full fence run before quoting, so you get an accurate price rather than a low estimate that grows once the work starts.
What should I budget for a new gate?
A single pedestrian gate installed with new posts and ironmongery in Cambridge typically costs between £200 and £450. A pair of driveway gates with heavier posts and drop bolts will usually sit higher - from around £500 upwards depending on the gate width and material. We give a fixed quote after measuring the opening, so the price you're quoted is the price you pay.
What does decking cost per square metre?
Timber decking in Cambridge typically costs between £120 and £200 per square metre supplied and installed. Composite decking sits at the higher end of that range or above, depending on the board brand and specification. The subframe, any steps, and ground preparation all affect the final price - we provide a detailed written quote once we've measured up and understood what you want.
Is a pergola expensive to build?
A freestanding timber pergola in Cambridge typically costs between £1,800 and £4,500 fitted, depending on size, timber grade and any additional features such as integrated lighting or privacy screens. We provide a fixed written quote after visiting your garden, so there are no surprises on the final invoice.
How much is custom trellis per panel?
Custom trellis in Cambridge is typically priced between £150 and £500 per panel installed, depending on size, timber grade and how it's fixed. A simple run of trellis topping an existing fence is at the lower end; freestanding panels on new posts with decorative detailing cost more. We quote per job after measuring up.
What does metal fencing cost per metre?
Metal fencing in Cambridge typically costs between £80 and £180 per linear metre fitted, depending on the system type, post spacing and any groundwork required. Bow-top railings with a powder-coat finish sit at the higher end of that range, while standard galvanised palisade is more economical. We quote per linear metre after visiting the site.
How is site hoarding priced?
Site hoarding in Cambridge typically costs between £35 and £75 per linear metre fitted, depending on height, ground type and whether vehicle or pedestrian gates are included. Steel hoarding systems cost more than timber but are worth considering for longer-duration sites. We provide written quotes quickly - usually within 24 hours of a site visit or plan review.

Gate Installation in Cambridge?

Call and speak to the person who will do the work, or send the form and we will come and measure up.

Call Quote